DY09 Electric Power Lean Production Line Conveyor Belt For Workshop

DY09 Electric Power Lean Production Line Conveyor Belt For Workshop

Operation editing of the belt line
Before the belt line runs, we must first confirm that the belt line equipment, the personnel and the conveyed items are in a safe and perfect condition; secondly, check the normal body without foreign objects in each part of the movement, check all electrical lines are normal, and the belt line can be put into operation when the belt is normal. Finally, check that the difference between the supply voltage and the rated voltage of the equipment is not more than 5%.

In the operation of the belt line, the following operations must be carried out:
1. close the main power switch, check whether the power supply is normal and whether the power indicator is bright. Do the next step after normal.

2. close the power switch of each circuit and check whether it is normal. The normal state is: the equipment does not move, the belt line running indicator is not bright, the power indicator light of the frequency converter and other equipment is bright, and the display panel of the frequency converter displays normal (no fault code display).

3. the electrical equipment is started in accordance with the technological process. After the first electrical equipment is started (the motor or other equipment have reached normal speed and normal state), the next electrical equipment is started.

In the operation of the belt line, we must observe the provisions in the design of the goods being conveyed, and observe the design ability of the belt line. Secondly, attention should be paid to all kinds of personnel not to touch the moving parts of the belt line, and non professionals should not contact with electrical components and control buttons at will. Finally, in the belt line operation, the frequency converter can not be broken. If the maintenance needs are determined, it is necessary to stop the frequency conversion operation, otherwise the frequency converter may be damaged.
The belt line will stop running and press the stop button to cut off the total power supply after the system is completely stopped.

The classification and editing of the belt line
1, linear belt conveyer line
2. Belt conveyer belt with worktable
3. The conveyer line of the climbing belt
4. The conveyer line of the turning belt
5, grooved belt conveyer
6, telescopic belt conveyer
7, belt conveyor line
8. side belt conveyer
9. round pipe belt conveyor -- new type